How To Clean Silonn Ice Maker

Silonn SLIM01G1 Portable Automatic Water ice Maker

Silonn SLIM01G1 Portable Automatic Ice Maker

Thank you for choosing this Silonn product! At Silonn nosotros strive to provide you lot with the best quality products and services in the industry. Should you accept any bug, please don't hesitate to contact united states of america.

IMPORTANT Safe INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
WARNING
To reduce the run a risk of fire, explosion, electric shock, or injury when using the unit, follow these basic safety precautions.

• Do not under any circumstances, alter or move the third (footing) prong from the ability cord. For personal safety, the unit of measurement must be properly grounded.
• Do non exceed the power outlet limit. Information technology is recommended that the unit of measurement is connected to its own circuit. Use just a 115V, 60 HZ standard electrical supply that is properly grounded following the National Electric Code and local codes and ordinances.
• Due to potential safety hazards under certain weather, we strongly advise confronting the use of an extension cord. Still, if you must utilise an extension cord, it is absolutely necessary that information technology is a UL-listed, three-wire ground type apparatus extension cord having a grounding type plug and that the electrical rating of the cord is ii Amperes (minimum) and 115 Volts.
• The unit of measurement must exist properly installed and located post-obit the installation instructions before it is used. The unit of measurement is for indoor household utilise only. Do not utilise outdoors.
• Do not shop or use flammable vapors or liquids near the unit.
• Do not permit children to climb, stand up, or hang on the unit. Serious injury may occur.
• Practice not use water that is micro-biologically unsafe or of unknown quality.
• Do not place the power cord in such a style it could be pulled on past children or cause a tripping chance.
• Practise non place the power cord in such a way that it is in contact with hot surfaces.
• Do not operate if any component, including the cord or plug, is damaged.
• Unplug the unit before cleaning by mitt and when not in use.
• Exercise not immerse any part of the unit in h2o.
• Practise non plug or unplug the unit with wet hands.
• Do not endeavour to disassemble, repair, modify, or supplant whatever part of the unit of measurement.
•  Use the unit simply for its intended purpose as described in this instruction manual.
• Do not employ any accessories non recommended by this instruction manual.
• When handling, installing and operating the unit, intendance should be taken to avert damage to the refrigerant tubing.
• Servicing shall be performed by factory-authorized service personnel and component parts shall be replaced with manufacturer-authorized replacement components.
• Do not operate if any component, including the string or plug, is damaged.

CAUTION
To reduce the risk of injury when using the unit, follow these basic safety precautions.

• Practice not remove whatsoever safe, warning, or production information labels from the unit.
• Closely lookout man children who are almost the unit when information technology is making ice.

Warning
Burn down OR EXPLOSION Gamble Flammable Refrigerant
This unit of measurement contains an isobutane refrigerant, also known as R600a, a natural gas with high ecology compatibility. However, information technology is as well combustible. Attach to the warnings below to reduce the risk of injury or holding damage.

1. When handling, installing, and operating the unit, care should be taken to avert damage to the refrigerant tubing.
2. Disposal of the unit under Federal and Local Regulations. Contact your local authorities for the environmentally safe disposal of your refrigerator.
3. Keep ventilation openings in the unit of measurement enclosures or the built-in structure clear of obstruction.
4. Practice not place the unit near heat sources such equally an oven.
5. Ensure a minimum of iii inches of clearance around the side and back walls of the unit for proper air apportionment.
6. Do non place the unit in direct sunlight.

Product Introduction

1. Water ice Shovel
2. Water ice Full Sensor
3. Water ice Basket
4. Large Viewing Window
5. Air Exhaust Fan
6. Drain Plug
7. Maximum Water Fill up Line
   Remove the ice basket, you can encounter the water fill line.
8. Command Console
9. Ice Scoop

Control Panel Introduction

	Key (with indicator light)	Part
ane	ADD Water	The indicator light turns reddish when the water reservoir lacks water.
2	Water ice FULL	The indicator lite turns ruddy when the ice basket is full.
3	S	The indicator calorie-free turns light-green when a small ice manner is selected.
	L	The indicator lite turns dark-green when a large ice style is selected.
four	ON/OFF Clean	Short press the "ON/OFF/Make clean" push to turn on the water ice maker and the "POWER" indicator lite turns green.
		Brusque press the"ON/OFF/Clean" button to turn off the ice maker and the "POWER" indicator flashes in green.
		When the ice maker is in the status of "stand by", long-press the "ON/OFF/ Clean" push button for v seconds and the water ice maker volition turn to cocky-cleaning way, the indicator lights of "S" and "L" will wink in green consecutively.
5	SELECT	Confirming large water ice mode or small ice mode.

Using Your Ice Maker

Earlier Get-go Utilise

1. Unpack the unit, then check and make certain that all the accessories including the ice basket and water ice scoop are included. Please contact us if some accessories are missing.
2. Delight ensure the unit is level and on a stable tabular array or platform to avoid malfunction.
3. Only utilize drinking h2o.
4. Practice non fill the water reservoir with hot water. This may harm the unit of measurement. It is best to fill the h2o reservoir with h2o of room temperature or lower.
5. Do not apply the unit of measurement in a very cold environs (lower than 41℉/v℃).
6. Make clean the unit by post-obit the functioning of "CLEANING AND MAINTENANCE" before operating.

Cleaning And Maintenance

To go along your ice tasting fresh and the unit of measurement looking great, nosotros recommend cleaning the unit in one case per calendar week.

1. Remove the ice handbasket.
2. Clean the unit of measurement interior with a soft fabric soaked with warm water and vinegar, and so rinse with clean water, and so drain all the water.
3.  Clean the exterior of the unit with a soft damp cloth. Use a mild dishwashing lather, if necessary.

Note:

• Do not use organic solvent, boiled water, detergent, strong acid, strong alkali, etc. for cleaning.
• Please empty the h2o reservoir and dry it for storage if the unit is not used for a long fourth dimension.
• When the unit is not to be used for a long duration, bleed the water completely & dry the interior.
• Store in a well-vented area.

Production Specifications

Model	SLIM01R/SLIM01G1
Voltage/Frequency	115V/60Hz
Ice-making Electric current	1.7A
Water ice-harvest Current	ii.0A
Working Ability	≤160W
H2o Reservoir	2L (0.53gal)
Ice Basket Capacity	i.32 lbs (0.six Kg)
Water ice Making Charge per unit	26 lbs per day
Ice Shape	Bullet
Ice Size	Small or Large
Material	ABS, PP

Troubleshooting

Problem	POSSIBLE CAUSES	SOLUTION
The "Add together H2o" indicator turns on.	Lack of Water.	Stop the ice-making cycle, fill with h2o, and press the "ON/OFF/ Make clean" key again to restart the ice maker.
The "Ice FULL" indicator turns on.	The water ice handbasket is full. The infrared light sensor does non piece of work.	1. Remove the water ice from the basket. two. Contact the states for aid.
Ice making wheel is normal simply no ice is produced.	i. Making water ice takes too much fourth dimension. two. The water temperature is too low	The room temperature should be fifty℉-105℉, water temperature should be 40 ℉ -90 ℉

Thanks over again for choosing this Silonn product!

All of us at Silonn do appreciate your product purchase. We hope that yous are as happy with the unit as we designing and manufacturing it for y'all. We strive to provide you lot with the best quality products and services in the industry. If you lot accept any questions delight don't hesitate to contact the states at

Technical Back up

• 877-546-8603 Mon-Fri 8am – 8pm (CST)
• Other Info: [electronic mail protected]

V1.0 (A)

DOWNLOAD Resources

• Silonn SLIM01G1 Portable Automated Ice Maker [pdf] Educational activity Transmission SLIM01G1 Portable Automatic Ice Maker, SLIM01G1, Portable Automatic Ice Maker
• Read more: https://manuals.plus/silonn/slim01g1-portable-automatic-water ice-maker-manual#ixzz7daRvPtfH

FAQ'Southward

How long does it take Silonn ice maker to make ice?

Most this particular. FAST Water ice MAKING: The Silonn water ice maker only takes six minutes to make nine bullet-shaped water ice cubes. Fill 2L of water into the h2o tank, maximum ice capacity can reach 26 pounds in 24 hours. 2 SIZES OF Ice CUBES: Y'all can make two unlike sizes of ice cubes.

Why is my portable ice maker not making ice?

Make clean All Water Filters
If your ice machine has the right amount of water just information technology'southward still not making ice, the water supply line could be blocked. This tin happen over fourth dimension if y'all haven't cleaned the auto in a while specially if you have hard water, which tin lead to mineral buildup.

How do you reset a portable ice maker?

Unplug the machine and wait 10 seconds. Plug the automobile back in and press the ON button. You should see a blue light appear, letting you know that the automobile has been reset.

How much water ice can I brand in ane day?

The SLIM01G1 can make up to 26 lbs of water ice per day.

How long does information technology accept to brand 26 lbs of ice?

It takes about 14-18 hours to make 26 lbs of ice.

Tin I use an extension cord with this unit?

No, you cannot use an extension cord with this unit.

What would crusade my ice maker to stop working?

A clog, leak, or damage in the h2o line may crusade the ice maker to close off automatically or otherwise stop working. Bank check the water ice maker inlet valve and water supply tubing for whatever leaks, harm, or blockages.

Do portable ice makers apply a lot of electricity?

Conclusion. Portable water ice makers do not cost a lot of money to operate; in most cases, it'southward less than $1 a twenty-four hours.

Do you add together water to a portable ice maker?

Portable water ice makers practice non require a water line. Instead, yous merely need to pour water into the unit of measurement's reservoir and turn it on in lodge to start the ice product process.

Why are my water ice cubes wet?

To accept the freshest water ice possible, cubes are constantly melting in the ice bin as new cubes are being produced. This is normal. Cubes may be wet/watery because water drips from the cutter filigree and into the ice bin during the ice harvest bike. This is due to the process of cut the ice slab into cubes.

How ofttimes should y'all make clean your portable ice maker?

It is mostly suggested to make clean the portable water ice maker every ii to 6 months. However, units used regularly may demand to be cleaned as much equally one time a month.

Documents / Resource

Source: https://manuals.plus/silonn/slim01g1-portable-automatic-ice-maker-manual

Share this post